Здравствуйте. Прошил модем через tftp, после этого красный повер и УСЁ))))
Подключился консольным кабелем, вот лог:
CFE version 1.0.37-10.1 for BCM96338 (32bit,SP,BE)
Build Date: Fri Nov 16 23:17:17 HKT 2007 (root@lijian)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbfc00000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV160B, id 0x2249, size 2048KB
CPU type 0x29010: 240MHz
Total memory: 8388608 bytes (8M
Total memory used by CFE: 0x80401000 - 0x80528630 (1209904)
Initialized Data: 0x8041DE90 - 0x8041FE60 (8144)
BSS Area: 0x8041FE60 - 0x80426630 (26576)
Local Heap: 0x80426630 - 0x80526630 (1048576)
Stack Area: 0x80526630 - 0x80528630 (8192)
Text (code) segment: 0x80401000 - 0x8041DE8C (118412)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-8) : 96338E
Number of MAC Addresses (1-32) : 11
Base MAC Address : 00:26:ed:67:7d:bf
PSI Size (1-64) KBytes : 24
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 110
Booting from only image (0xbfc10000) ...
Code Address: 0x80010000, Entry Address: 0x80175018
Decompression OK!
Entry at 0x80175018
Closing network.
Starting program at 0x80175018
Linux version 2.6.8.1 (root@linux) (gcc version 3.4.2) #1 Wed Jan 30 17:19:31 CST 2008
Parallel flash device: name AM29LV160B, id 0x2249, size 2048KB
Total Flash size: 2048K with 35 sectors
***Board id is not set****: Using the default PSI size: 24
96338E prom init
CPU revision is: 00029010
Determined physical RAM map:
memory: 007a0000 @ 00000000 (usable)
On node 0 totalpages: 1952
DMA zone: 1952 pages, LIFO batch:1
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd
brcm mips: enabling icache and dcache...
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB 2-way, linesize 16 bytes.
PID hash table entries: 32 (order 5: 256 bytes)
Using 120.000 MHz high precision timer.
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 6076k/7808k available (1243k kernel code, 1712k reserved, 180k data, 64k init, 0k highmem)
Calibrating delay loop... 239.20 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for "wait" instruction... unavailable.
NET: Registered protocol family 16
Can"t analyze prologue code at 80145754
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v1.0
brcmboard: brcm_board_init entry
bcm963xx_serial driver v2.0
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 1024)
NET: Registered protocol family 1
NET: Registered protocol family 17
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 64k freed
init started: BusyBox v1.00 (2008.01.30-09:22+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
BusyBox v1.00 (2008.01.30-09:22+0000) Built-in shell (msh)
Enter "help" for a list of built-in commands.
Loading drivers and kernel modules...
atmapi: module license "Proprietary" taints kernel.
blaadd: blaa_detect entry
adsl: adsl_init entry
Broadcom BCMPROCFS v1.0 initialized
BCM63xx_ENET board id not set
insmod: cannot insert `/lib/modules/2.6.8.1/extra/bcm_enet.ko": Success (19): Success
BcmAdsl_Initialize=0xC0063218, g_pFnNotifyCallback=0xC0079644
pSdramPHY=0xA07FFFF8, 0x2400040 0x80108810
AdslCoreHwReset: AdslOemDataAddr = 0xA07FBB64
dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
==> Bcm963xx Software Version: 3.06L.03-T1.0a-080130.A2pB023k.d17m <==
igmp: not found
pvc2684d: Interface "nas_0_32" created sucessfully
pvc2684d: Communicating over ATM 0.0.32, encapsulation: LLC
device nas_0_32 entered promiscuous mode
pvc2684d: Interface "nas_1_33" created sucessfully
pvc2684d: Communicating over ATM 0.1.33, encapsulation: LLC
device nas_1_33 entered promiscuous mode
pvc2684d: Interface "nas_0_35" created sucessfully
pvc2684d: Communicating over ATM 0.0.35, encapsulation: LLC
device nas_0_35 entered promiscuous mode
pvc2684d: Interface "nas_0_100" created sucessfully
pvc2684d: Communicating over ATM 0.0.100, encapsulation: LLC
device nas_0_100 entered promiscuous mode
pvc2684d: Interface "nas_8_35" created sucessfully
pvc2684d: Communicating over ATM 0.8.35, encapsulation: LLC
device nas_8_35 entered promiscuous mode
pvc2684d: Interface "nas_8_81" created sucessfully
pvc2684d: Communicating over ATM 0.8.81, encapsulation: LLC
device nas_8_81 entered promiscuous mode
pvc2684d: Interface "nas_0_200" created sucessfully
pvc2684d: Communicating over ATM 0.0.200, encapsulation: LLC
device nas_0_200 entered promiscuous mode
расскажите, кто знает, как работоспособность восстановить))))
заранее благодарен
